Kontron KBox C-101 Bedienungsanleitung PDF herunterladen (Seite 69)

18. Standard Interfaces – Pin Assignments KBox C-101 – User’s Guide (Version 2.00)

18.2.2. Serial Port RS232/RS422

This port must be factory installed and configured only.

When you order the KBox C-101 with this extended interface via RS232/422 adapter module, you have to

specify in your ordering:

 the needed configuration of this port as RS232 or RS422 and

 for RS422 configuration: if the onboard termination resistor (120Ω) should be enabled or

disabled.

18.2.2.1. Serial Port RS232/RS422 configured as RS232

Pin Signal Name 9-pin D-SUB Plug (male)

1 DCD (Data Carrier Detect)

2 RxD (Receive Data)

3 TxD (Transmit Data)

4 DTR (Data Terminal Ready)

5 GND (Signal Ground)

6 DSR (Data Set Ready)

7 RTS (Request to Send)

8 CTS (Clear to Send)

9 RI (Ring Indicator)

18.2.2.2. Serial Port RS232/RS422 configured as RS422

Pin Signal Name 9-pin D-SUB Connector (female)

1 NC

2 RxD- (Receive Data-)

3 TxD- (Transmit Data-)

4 NC

5 GND (Signal Ground)

6 NC

7 TxD+ (Transmit Data+)

8 RxD (Receive Data+)

9 NC

www.kontron.com 67

1 2 ... 64 65 66 67 68 69 70 71

Keine Kommentare

Kontron KBox C-101 Bedienungsanleitung Seite 69