Kontron COMe-mBT10 Bedienungsanleitung PDF herunterladen (Seite 50)

COMe-mBT10 / Pinout List

6.2 Connector X1A Row A

Pin Signal Description Type Termination Comment

A1 GND Power Ground PWR GND - -

A2 GBE0_MDI3- Ethernet Media Dependent Interface 3 - DP-I/O - -

A3 GBE0_MDI3+ Ethernet Media Dependent Interface 3 + DP-I/O - -

A4 GBE0_LINK100# Ethernet Speed LED OD - -

A5 GBE0_LINK1000# Ethernet Speed LED OD - -

A6 GBE0_MDI2- Ethernet Media Dependent Interface 2 - DP-I/O - -

A7 GBE0_MDI2+ Ethernet Media Dependent Interface 2 + DP-I/O - -

A8 GBE0_LINK# LAN Link LED OD - -

A9 GBE0_MDI1- Ethernet Media Dependent Interface 1 - DP-I/O - -

A10 GBE0_MDI1+ Ethernet Media Dependent Interface 1 + DP-I/O - -

A11 GND Power Ground PWR GND - -

A12 GBE0_MDI0- Ethernet Media Dependent Interface 0 - DP-I/O - -

A13 GBE0_MDI0+ Ethernet Media Dependent Interface 0 + DP-I/O - -

A14 GBE0_CTREF Center Tab Reference Voltage O - 100nF capacitor to GND

A15 SUS_S3# Suspend To RAM (or deeper) Indicator O-3.3 PD 10k -

A16 SATA0_TX+ SATA Transmit Pair 0 + DP-O - -

A17 SATA0_TX- SATA Transmit Pair 0 - DP-O - -

A18 SUS_S4# Suspend To Disk (or deeper) Indicator O-3.3 - -

A19 SATA0_RX+ SATA Receive Pair 0 + DP-I - -

A20 SATA0_RX- SATA Receive Pair 0 - DP-I - -

A21 GND Power Ground PWR GND - -

A22 USB_SSRX0- USB 3.0 Receive Pair 0 - DP-I - -

A23 USB_SSRX0+ USB 3.0 Receive Pair 0 + DP-I - -

A24 SUS_S5# Soft Off Indicator O-3.3 - -

A25 USB_SSRX1- USB 3.0 Receive Pair 1 - DP-I - -

A26 USB_SSRX1+ USB 3.0 Receive Pair 1 + DP-I - -

A27 BATLOW# Battery Low I-3.3 PU 10k 3.3V (S5) assertion will prevent wake from S3-S5 state

A28 (S)ATA_ACT# Serial ATA activity LED OD-3.3 PU 10k 3.3V (S0) can sink 15mA

A29 AC/HDA_SYNC HD Audio Sync O-3.3 PD 20k in CPU -

A30 AC/HDA_RST# HD Audio Reset O-3.3 PD 20k in CPU -

A31 GND Power Ground PWR GND - -

A32 AC/HDA_BITCLK HD Audio Bit Clock Output O-3.3 PD 20k in CPU -

A33 AC/HDA_SDOUT HD Audio Serial Data Out O-3.3 PD 20k in CPU -

A34 BIOS_DIS0# BIOS Selection Strap 0 I-3.3 PU 10k 3.3V (S0) -

A35 THRMTRIP# Thermal Trip O-3.3 PU 10k 3.3V (S0) do not use as this signal does not differ between

regular and over-temperature shutdown

A36 USB6- USB 2.0 Data Pair Port 6 – DP-I/O PD/PU in CPU PD 15kOhm +/-5% on Downstream Facing Port; PU