Kontron AM4020 IPMI Firmware Bedienungsanleitung PDF herunterladen (Seite 25)

AM4020 IPMI Firmware

ID 1036-5671, Rev. 2.0 Page 17

P R E L I M I N A R Y

3.2 Set Control State (Firmware Hub, Boot Order)

Table 6: Set Control State

COMMAND LUN NetFn CMD

Set Control State (Firmware Hub, Boot Order) 00h OEM = 3Eh 20h

REQUEST DATA

Byte Data Field

1 Control ID:

00h = Firmware Hub (SPI Flash) Selection

9Dh = Boot Order Configuration

2 Control State for SPI Flash selection:

(These settings are stored in EEPROM and applied (to logic) each time the IPMI controller

detects power-on)

00h = SPI flash selection is not inverted

01h = SPI flash selection is logically inverted

Please note that this selection will be automatically toggled by the IPMI controller during a

failing boot process. Other payload sided settings may additionally modify this selection.

Control State for Boot Order Configuration:

(These settings are stored in EEPROM and applied (to logic) each time the IPMI controller

detects power-on)

00h = No override, boot as usual

01h = Next boot device is: Floppy

02h = Next boot device is: HDD

03h = Next boot device is: CD

04h = Next boot device is: Network

05h = Next boot device is: USB Floppy

06h = Next boot device is: USB HDD

07h = Next boot device is: USB CDROM

RESPONSE DATA

Byte Data Field

1 Completion Code

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 49 50

Keine Kommentare

Kontron AM4020 IPMI Firmware Bedienungsanleitung Seite 25