Kontron AM4530 Bedienungsanleitung PDF herunterladen (Seite 34)

21 AM453x

www.kontron.com

4.4.2.2 Exporting the Shared Directory

The following command will specify the mounting point to be used as NFS and will set the options.

# echo “/mnt/disk1 *(rw,no_root_squash,sync,no_subtree_check)” >> /etc/exports

4.4.2.3 Restarting the NFS server

Use the following command to restart the NFS server:

# /etc/init.d/nfsd restart

4.4.2.4 Mounting the NFS on a Remote Linux PC

1 Make sure a NFS server is running on a remote machine

2 Create a folder for mounting the remote NFS:

# mkdir /mnt/nfs

3 Mount the remote NFS :

# mount 192.168.100.1:/mnt/disk1 /mnt/nfs

4.4.3 Setting-up iSCSI Target

4.4.3.1 Exporting the Shared Device

To share /dev/sda, add the following lines to the /etc/ietd.conf file:

Target iqn.2001-04.com.example:storage.disk2.sys1.xyz

IncomingUser

OutgoingUser

Lun 0 Path=/dev/sda,Type=fileio

Alias Lun1

4.4.3.2 Specifying IP Addresses for Initiators

For accessing iqn.2001-04.com.example:storage.disk2.sys1.xyz, add allowed IP addresses for initiators in

the initiators.allow file. Example

iqn.2001-04.com.example:storage.disk2.sys1.xyz 192.168.100.1

4.4.3.3 Restarting the iSCSI Target

After changing the settings restart the iSCSI target using the following command:

# /etc/init.d/iscsi-target restart

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 46 47

Keine Kommentare

Kontron AM4530 Bedienungsanleitung Seite 34