Kontron AT8402 CLI Bedienungsanleitung PDF herunterladen (Seite 174)

Utility Commands AT8402

AT8402 CLI Reference Manual Page 4 - 34

4.8.6 hardware-address

This command specifies the hardware address of a DHCP client. Hardware-address is

the MAC address of the hardware platform of the client consisting of 6 bytes in dotted

hexadecimal format. Type indicates the protocol of the hardware platform. It is 1 for 10

MB Ethernet and 6 for IEEE 802.

Default ethernet

Format

hardware-address <hardwareaddress> <type>

Mode DHCP Pool Config

4.8.6.1 no hardware-address

This command removes the hardware address of the DHCP client.

Format

no hardware-address

Mode DHCP Pool Config

4.8.7 host

This command specifies the IP address and network mask for a manual binding to a

DHCP client. Address and Mask are valid IP addresses; each made up of four decimal

bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. The prefix-length is an

integer from 0 to 32

Default none

Format

host <address> [{<mask> | <prefix-length>}]

Mode DHCP Pool Config

4.8.7.1 no host

This command removes the IP address of the DHCP client.

Format

no host

Mode DHCP Pool Config

4.8.8 lease

This command configures the duration of the lease for an IP address that is assigned

from a DHCP server to a DHCP client. The overall lease time should be between 1-

86400 minutes. If you specify infinite, the lease is set for 60 days. You can also specify

a lease duration. Days is an integer from 0 to 59. Hours is an integer from 0 to 1439.

Minutes is an integer from 0 to 86399.

Default 1 (day)

Format

lease [{<days> [<hours>] [<minutes>] | infinite}]

Mode DHCP Pool Config

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 252 253

Keine Kommentare

Kontron AT8402 CLI Bedienungsanleitung Seite 174