Kontron KTGM45-mITX Bedienungsanleitung PDF herunterladen (Seite 12)

100

101

KTGM45 Users Guide

KTD-N0793-O Page 12

I/O Control

Two Winbond W83627DHG LPC Bus I/O Controllers

Peripheral

interfaces

• Four USB 2.0 ports on I/O area

• Eight USB 2.0 ports on internal pinrows

• One IEEE 1394a-2000 (up to 400M bits/s) on I/O area (not available on

KTGM45/mITX Basic)

• One IEEE 1394a-2000 (up to 400M bits/s) on internal pinrows (not available on

KTGM45/mITX Basic)

• Four Serial ports (RS232)

• Four Serial ATA-300 IDE interfaces with RAID 0/1 support

• One PATA 66/100/133 interface with support for 2 devices

• CF (Compact Flash) interface (KTGM45/mITX Plus only) supporting CF type I and II

complying with +5V supply and Vih min. 2.0V and Vil max. 0.8V. (UDMA2 max.).

Note that only one PATA device is supported when CF is used and only by use of 40-

wire cable (not 80-wire cable). Optionally use SATA devices.

• PS/2 keyboard and mouse ports

LAN

Support

• 1x 10/100/1000Mbits/s LAN (ETHER1) using Intel® Boazman-LM WG82567LM

Gigabit PHY connected to ICH9M Integrated GbE MAC supporting AMT 4.0

• 2x 10/100/1000Mbits/s LAN (ETHER2/ETHER3)using Intel® Hartwell 82574L PCI

Express controllers (not available on KTGM45/mITX Basic)

• PXE Netboot supported.

• Wake On LAN (WOL) supported (only on ETHER1).

BIOS

• Kontron Technology / AMI BIOS (core version)

• Support for Advanced Configuration and Power Interface (ACPI 3.0b), Plug and Play

o Suspend To Ram

o Suspend To Disk

o Intel Speed Step

• Secure CMOS/ OEM Setup Defaults

• “Always On” BIOS power setting

• RAID Support (RAID modes 0 and 1)

Expansion

Capabilities

• PCI Bus routed to PCI slot(s) (PCI Local Bus Specification Revision 2.3)

o KTGM45/mITX: 1 slot PCI 2.3, 32 bits, 33 MHz, 5V compliant

o KTGM45/Flex: 2 slots PCI 2.3, 32 bits, 33 MHz, 5V compliant

o KTGM45/ATXE: 5 slots PCI 2.3, 32 bits, 33 MHz, 5V compliant

• PCI-Express bus routed to PCIe (PCI-Express) slot(s) (PCIe 1.1)

o KTGM45/mITX: 1 slot PCIe x16 (PCIe 2.0)

1 slot miniPCI-Express (PCIe 1.1)

o KTGM45/Flex: 1 slot PCIe x16 (PCIe 2.0)

1 slot PCIe x1 (x16 connector) (PCIe 1.1)

o KTGM45/ATXE: 1 slot PCIe x16 (PCIe 2.0)

1 slot PCIe x1 (x16 connector) (PCIe 1.1)

• SMBus routed to FEATURE, PCI slot, PCI Express

• LPC Bus routed to TPM connector (not available on KTGM45/mITX)

• DDC Bus routed to CRT connector

• 8 x GPIOs (General Purpose I/Os) routed to FEATURE connector

Hardware

Monitor

Subsystem

• Smart Fan control system, support Thermal® and Speed® cruise for three on-board

Fan control connectors: FAN_CPU, FAN_SYS and FEATURE (AUXFAN in BIOS)

• Three thermal inputs: CPU die temperature, System temperature and External

temperature input routed to FEATURE connector. (Precision +/- 3ºC)

• Voltage monitoring

• Intrusion (Case Open) detect input

Power

Supply Unit

ATX/BTX (w. ATX+12V) PSU for full PCI/PCIe load.

Alternatively +12V single supply via ATX+12V (4-pole) connector, but with limitation to

PCI/PCIe load.

Operating

Systems

Support

• WinXP

• WinVista

• Windows 7

• Linux (limitations may apply)

(Continues)

System specification

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 100 101

Kommentare zu diesen Handbüchern

Keine Kommentare

Kontron KTGM45-mITX Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Kontron KTGM45-mITX