Kontron KTHM65-mITX Bedienungsanleitung PDF herunterladen (Seite 7)

KTHM65 Users Guide

KTD-N0838-A Page 7

Introduction

This manual describes the KTHM65/mITX board made by KONTRON Technology A/S.

The KTHM65 board is based on KTQM67/mITX design, where the chipset QM67 is replaced by HM65,

having less functionality. The KTHM65 support 2

and 3

generation Intel® i7 -, i5 -, i3 2Core and

4Core processor and the Celeron B810 2Core, see “Processor Support Table for more specific details.

The difference between the KTHM65/mITX and the KTQM67/mITX is specified in the following table:

Function KTHM65/mITX KTQM67/mITX

Chipset HM65 QM67

LAN ETH1 ETH1 + ETH2 + ETH3

Display support

DVI-I - 2x DP - LVDS

DVI-I - 2x DP - LVDS - eDP

IEEE1394a - IEEE1394_0 - IEEE1394_1

USB 6 External + 6 Internal

6 External + 8 Internal

RAID

RAID 0/1/5/10

Intel® AMT - AMT 7.0

Intel® TXT - Yes *

Intel® VT-d

Yes *

Intel® vPRO - Yes *

Intel® Remote PC Assist Technology

Reactive Proactive - Reactive

(*) Depends also on processor type.

Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is

focused on describing the KTHM65 board’s special features and is not intended to be a standard PC-AT

textbook.

New users are recommended to study the short installation procedure stated in the following chapter

before switching-on the power.

All configuration and setup of the CPU board is either done automatically or manually by the user via

the CMOS setup menus. Only exception is the “Load Default BIOS Settings” Jumper.

Introduction

1 2 3 4 5 6 7 8 9 10 11 12 ... 128 129

Keine Kommentare

Kontron KTHM65-mITX Bedienungsanleitung Seite 7