Kontron RTM8242 Bedienungsanleitung PDF herunterladen (Seite 20)

7RTM8242

www.kontron.com

Table 2-1:Approved SFP Copper list

Table 2-2:Approved SFP Optical list

2.3 SFP+

The RTM8242 has 8 SFP/SFP+ module connectors available on the RTM face plate. The SFP+ module signals

come from the front board at 1/10Gb through Zone 3 connectors after passing through a signal conditioning

PHY.

Table 2-3:Approved SFP+ list

2.4 MMC Boot Block

The MMC runs Boot Block and IPMI firmware from its internal 512KB flash memory.The Boot Block firmware

keeps the last two copies of the IPMI firmware in a dedicated external flash memory. The Boot Block

activates the selected IPMI image and can rollback a firmware update in case of problems.

2.5 Hardware Management Overview

The RTM MMC communicates with the front board using the IPMB-L channel. Kontron’s Intelligent RTM

address on the IPMB-L is fixed and has a value of 0xA6.

Manufacturer Part Number Description Company

ABCU-5710RZ 1000BASE-T Copper SFP Transceiver Avago

FCLF-8521-3 1000BASE-T Copper SFP Transceiver Finisar

Manufacturer Part Number Description Company

FTLF8519P2BNL 1.25 Gb/s 1000Base-SX Ethernet Finisar

FTLX8571D3BCV 1G/10G Dual-Rate SFP+ transceivers Finisar

Manufacturer Part Number Description Company

AFBR-703SDDZ 10Gb/1Gb Ethernet, 850nm SFP+ Transceiver Avago

AFBR-703SDZ-IN2 10Gb Ethernet, 850nm SFP+ Transceiver Intel

FTLX8571D3BCL 10Gb/s 850nm Multimode Datacom SFP+ Transceiver Finisar

FTLX1471D3BCL

10Gb/s 1310nm Single Mode Datacom SFP+

Transceiver

Finisar

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Keine Kommentare

Kontron RTM8242 Bedienungsanleitung Seite 20