Kontron S5500 SEL Troubleshooting Bedienungsanleitung PDF herunterladen (Seite 42)

System Event Log Troubleshooting Guide for Intel

S5500/S3420 series Server Boards Cooling subsystem

Revision 1.0 Intel order number G74211-001 33

Byte

Field

Description

Event Direction and

Event Type

[7] Event direction

0b = Assertion Event

1b = Deassertion Event

[6:0] Event Type = 08h (Generic ‘digital’ Discrete)

Event Data 1

[7:6] – 00b = Unspecified Event Data 2

[5:4] – 00b = Unspecified Event Data 3

[3:0] – Event Trigger Offset as described in Table 30

Event Data 2

Not used

Event Data 3

Not used

The following table describes the severity of each of the event triggers for both assertion and for deassertion.

Table 30: Fan Presence Sensors – Event Trigger Offset – Next Steps

Event Trigger Offset

Assertion

Severity

Deassert

Severity

Description

Next Steps

Hex

Description

01h

Device

Present

Degraded

Assertion –A fan was inserted. This

event may also get logged when the

BMC initializes when AC is applied.

Informational only

Deassert – A fan was removed, or

was not present at the expected

location when the BMC initialized

These events only get generated in systems with hot-swappable fans, and normally

only when a fan is physically inserted or removed. If fans were not physically removed:

1. Use the Quick Start Guide to check if the right fan headers were used.

2. Swap the fans round to see if the problem stays with the location, or follows

the fan.

3. Replace fan or fan wiring/housing depending on the outcome of step 2.

4. Ensure the latest FRUSDR update has been run and the correct chassis was

detected or selected.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 113 114

Kommentare zu diesen Handbüchern

Keine Kommentare

Kontron S5500 SEL Troubleshooting Bedienungsanleitung Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Kontron S5500 SEL Troubleshooting