Kontron AT8902M CLI Bedienungsanleitung PDF herunterladen (Seite 178)

Quality of Service (QoS) Commands AT8902M

AT8902M CLI Reference Manual Page 4 - 10

• The total number of class rules formed by the complete reference class chain

(including both predecessor and successor classes) must not exceed a platform-

specific maximum. In some cases, each removal of a refclass rule reduces the max-

imum number of available rules in the class definition by one.

4.3.5.1 no match class-map

This command removes from the specified class definition the set of match conditions

defined for another class. The

<refclassname> is the name of an existing DiffServ

class whose match conditions are being referenced by the specified class definition.

Format

no match class-map <refclassname>

Mode Class-Map Config

4.3.6 match cos

This command adds to the specified class definition a match condition for the Class of

Service value (the only tag in a single tagged packet or the first or outer 802.1Q tag of

a double VLAN tagged packet). The value may be from 0 to 7.

NOTE: This command is not available on the Broadcom 5630x platform.

Default none

Format

match cos <0-7>

Mode Class-Map Config

4.3.7 match secondary-cos

This command adds to the specified class definition a match condition for the

secondary Class of Service value (the inner 802.1Q tag of a double VLAN tagged

packet). The value may be from 0 to 7.

NOTE: This command is not available on the Broadcom 5630x platform.

Default none

Format

match secondary-cos <0-7>

Mode Class-Map Config

4.3.8 match destination-address mac

This command adds to the specified class definition a match condition based on the

destination MAC address of a packet. The <macaddr>

parameter is any layer 2 MAC

address formatted as six, two-digit hexadecimal numbers separated by colons (e.g.,

00:11:22:dd:ee:ff). The <

macmask> parameter is a layer 2 MAC address bit mask, which

need not be contiguous, and is formatted as six, two-digit hexadecimal numbers

separated by colons (e.g., ff:07:23:ff:fe:dc).

NOTE: This command is not available on the Broadcom 5630x platform.

Default none

Format

match destination-address mac <macaddr> <macmask>

Mode Class-Map Config

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 314 315

Kommentare zu diesen Handbüchern

Keine Kommentare

Kontron AT8902M CLI Bedienungsanleitung Seite 178

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Kontron AT8902M CLI