Kontron COMe Eval Carrier T2 Bedienungsanleitung PDF herunterladen (Seite 21)

COM Express® Eval Carrier Type 2

GPIO J48 PIN Description GPIO J48 Pin Description

1 VCC 3.3V 2 GPO0 / SD_CLK

3 GPI0 / SD_DATA0 4 GPO1 / SD_CMD

5 GPI1 / SD_DATA1 6 GPO2 / SD_WP

7 GPI2 / SD_DATA2 8 GPO3 / SD_CD#

9 GPI3 / SD_DATA3 10 GND

Note1: A SD-Card is detected if Card Detect is at low level. The write protection is active (read only) if SD_WP is

at high level.

Note2: The switching circuitry (J41: short jumper = SD card; open jumper = GPIO) which selects GPIO or SDIO

interface may influence the signal quality of SDIO which results in detection or boot issues with some

fast SD/SDHC cards. Therefore it's recommended to reduce SDIO interface speed to 24MHz in module's

BIOS if supported

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 36 37

Keine Kommentare

Kontron COMe Eval Carrier T2 Bedienungsanleitung Seite 21