
KTD-00774-G KTUS15/mITX Page 72 of 84
7.4 PCIPnP Menu
Advanced PCI/PnP Settings
System Boot.
<-> Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
Warning: Setting wrong values in below sections
May cause system to malfunction.
Clear NVRAM [No]
Plug & Play O/S [No]
PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
Palette Snooping [Disabled]
PCI IDE BusMaster [Disabled]
OffBoard PCI/ISA IDE Card [Auto]
Reserved Memory Size [Disabled]
V02.63+ (C)Copyright 1985-2008, American Megatrends, Inc.
Clear NVRAM during System Boot.
Yes
No: lets the BIOS configure all the devices in the
system.
Yes: lets the operating system configure Plug and
Play (PnP) devices not required for boot if your
system has a Plug and Play operating system.
32, 64, 96, 128,
160, 192, 224, 248
Value in units of PCI clocks for PCI device latency
timer register.
No
Yes: Assigns IRQ to PCI VGA card if card requests
IRQ.
No: Does not assign IRQ to PCI VGA card even if
Enabled
Enabled: informs the PCI devices that an ISA
graphics device is installed in the system so the card
Enabled: Bios uses PCI busmastering for reading /
writing to IDE drivers.
OffBoard PCI/ISA IDE Card
PCI Slot1
PCI Slot2
PCI Slot3
PCI Slot4
PCI Slot5
Some PCI IDE cards may require this to be set to the
PCI slot number that is holding the card.
Auto: Works for most PCI IDE cards.
16K
32K
Size of memory block to reserve for legacy ISA
devices.
Kommentare zu diesen Handbüchern