Kontron PB-SIO4 Bedienungsanleitung PDF herunterladen (Seite 25)

PB-SIO4 Configuration

ID 19957, Rev. 0300 Page 3 - 3® PEP Modular Computers GmbH

3. Configuration

3.1 PB-SIO4 Address Map and ID Byte

The PB-SIO4 is addressed (odd byte access) by using the carrier board base address

and one of the following offsets for the piggyback location:

Piggyback location A ( the upper position on the carrier board)

Base Address + $01 DUART1

Base Address + $21 DUART2

Base Address + $41 ID Byte

Piggyback location B ( the lower position on the carrier board)

Base Address + $81 DUART1

Base Address + $A1 DUART2

Base Address + $C1 ID Byte

The PB-SIO4 has an ID Byte of $F7 (RS232).

3.2 VMEbus Interrupts

Each DUART device is able to issue an interrupt request (*IRQ) to the carrier board. In

the event of simultaneous interrupt requests those from DUART #1 have priority over

those from DUART #2.

The interrupt level is set by the carrier board. See the carrier board documentation for

setting of the level. The interrupt vector itself is provided by the DUART.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

Keine Kommentare

Kontron PB-SIO4 Bedienungsanleitung Seite 25