Kontron CP305 BIOS Bedienungsanleitung PDF herunterladen (Seite 28)

Advanced Setup CP305 BIOS

Page 18 ID 1035-8356, Rev. 1.0

P R E L I M I N A R Y

Legacy IDE Channels

This function controls the configuration of the available device channels within the legacy com-

patible IDE controller device.

Note: This function is only available when the IDE Configuration is set to Compatible.

Optimal and Fail-Safe default settings: SATA Pri, PATA Sec

Configure SATA as

This function controls the SATA controller device's operating mode.

Optimal and Fail-Safe default settings when the Configuration is set to Enhanced: IDE

Optimal and Fail-Safe default settings when the Configuration is set to PATA only: Disabled

SETTING DESCRIPTION

SATA Only Use this setting to specify the onboard SATA connector (SATA0) as the primary master,

the daughterboard connector (SATA2) as the secondary master, the RIO-1 channel

(SATA1) as the primary slave, and the RIO-2 channel (SATA3) as the secondary slave.

Reserved Reserved for future use.

SATA Pri, PATA Sec Use this setting to specify the onboard SATA connector as the primary master, the

daughterboard SATA connector as the primary slave and the PATA channel as the sec-

ondary channel.

PATA Only Use this setting to specify the PATA channel as the primary channel. With this setting,

all SATA connectors are disabled by default.

SETTING DESCRIPTION

Disabled Use this setting to disable the SATA controller.

IDE Use this setting to allow the SATA controller to operate as a legacy IDE controller. In this

case, old IDE drivers can be used.

RAID The CP305 does not provide RAID support. Thus, this setting has no effect on the CP305.

AHCI Use this setting to allow the SATA controller to operate as an AHCI controller. In this case,

AHCI drivers must be used.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 123 124

Keine Kommentare

Kontron CP305 BIOS Bedienungsanleitung Seite 28