Kontron CP305 BIOS Bedienungsanleitung PDF herunterladen (Seite 50)

Advanced Setup CP305 BIOS

Page 40 ID 1035-8356, Rev. 1.0

P R E L I M I N A R Y

Serial Port Mode

SDO

This function is used to select the baud rate (transmitted bits per second) of the serial port for

console redirection.

Note: This function is only available when the Remote Access function is set to Enabled.

Optimal and Fail-Safe default settings: 115200 8,n,1

Flow Control

SDO

This function is used to select the flow control for console redirection.

Note: This function is only available when the Remote Access function is set to Enabled.

Optimal and Fail-Safe default settings: None

Redirection After BIOS POST

SDO

This function is used to select redirection after BIOS POST.

Note: This function is only available when the Remote Access function is set to Enabled.

Optimal and Fail-Safe default settings: Always

SETTING DESCRIPTION

115200 8,n,1 Use this setting to select 115200 as the baud rate of the serial port.

57600 8,n,1 Use this setting to select 57600 as the baud rate of the serial port.

38400 8,n,1 Use this setting to select 38400 as the baud rate of the serial port.

19200 8,n,1 Use this setting to select 19200 as the baud rate of the serial port.

09600 8,n,1 Use this setting to select 09600 as the baud rate of the serial port.

SETTING DESCRIPTION

None Use this setting to deactivate flow control.

Hardware Use this setting to select the flow control by hardware.

Software Use this setting to select the flow control by software.

SETTING DESCRIPTION

Disabled Use this setting to turn off the redirection after POST.

BootLoader Use this setting to activate the redirection during POST and during BootLoader.

Always Use this setting to specify that the redirection is always active.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 123 124

Keine Kommentare

Kontron CP305 BIOS Bedienungsanleitung Seite 50