Kontron pITX-SP Bedienungsanleitung PDF herunterladen (Seite 18)

KTD-S0002-I Page 13 Graphics Interface

pITX-SP User's Guide

6.2 Flat Panel Connector (JILI30)

The LVDS interface for the flat panel is available through the J1802 connector (30 pins) on the bottom side

of the board. This connector represents the JILI interface. The implementation of this subsystem complies

with the JILI specification of KONTRON Technology A/S. A variety of cables for different display types are

available from KONTRON. Please refer to the actual Display Cable Guide on the same product web site.

Header Pin Signal Name Function

1 FTX0- First channel data output 0 (negative)

2 FTX0+ First channel data output 0 (positive)

3 FTX1- First channel data output 1 (negative)

4 FTX1+ First channel data output 1 (positive)

5 FTX2- First channel data output 2 (negative)

6 FTX2+ First channel data output 2 (positive)

7 GND Ground

8 FTXC- First channel clock output (negative)

9 FTXC+ First channel clock output (positive)

10 FTX3- First channel data output 3 (negative)

11 FTX3+ First channel data output 3 (positive)

12 N.C. Not connected

13 N.C. Not connected

14 GND Ground

15 N.C. Not connected

16 N.C. Not connected

17 GND Ground

18 N.C. Not connected

19 N.C. Not connected

20 N.C. Not connected

21 N.C. Not connected

22 N.C. Not connected

23 N.C. Not connected

24 GND Ground

25 SDA I2C data line

26 DATAENA Panel power output

27 SCL I2C clock line

28 - 30

VCC

Power +3.3V or +5V

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 66 67

Keine Kommentare

Kontron pITX-SP Bedienungsanleitung Seite 18