Kontron pITX-SP Bedienungsanleitung PDF herunterladen (Seite 21)

KTD-S0002-I Page 16 Graphics Interface

pITX-SP User's Guide

6.7 Backlight Connector

Backlight is available through the J1801 connector (7 pins). An external voltage source must be used to

supply the backlight with +5V or +12V.

Header Pin Signal Name Function

1 N.C. Not connected

2 BKLTADJ Brightness control (0V - +5V)

3 GND Ground

4 N.C. Not connected

5 N.C. Not connected

6 GND Ground

7 BKLTON Backlight on/off

6.8 Display Default Settings

On the first boot-up a DVI monitor must be connected to the pITX-SP. The simultaneous mode is not sup-

ported by Intel

. During the boot process respectively DOS mode the VGA BIOS only allows a DVI monitor or

a flat panel.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 66 67

Keine Kommentare

Kontron pITX-SP Bedienungsanleitung Seite 21