KTD-N0793-O Page 45
3.11.2 USB Connector 1/3 (USB1/3)
See Frontpanel Connector (FRONTPNL) description.
3.11.3 USB Connector 4/5 (USB4/5)
USB Ports 4 and 5 are mounted together with IEEE1394_1 port.
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
3.11.4 USB Connector 6/7 (USB6/7)
USB Ports 6 and 7 are available on the internal USB6/7 pinrow connector.
Note
Ioh/Iol Type
Signal PIN Signal Type Ioh/Iol
Note
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Signal Description
USB6+ USB6-
USB7+ USB7-
Differential pair works as Data/Address/Command Bus.
5V/SB5V 5V supply for external devices. SB5V is supplied during powerdown to allow wakeup
on USB device activity. Protected by resettable 1.1A fuse covering both USB ports.
Note
Ioh/Iol Type Signal PIN Signal Type Ioh/Iol
Note
Signal Description
USB4+ USB4-
USB5+ USB5-
Differential pair works as Data/Address/Command Bus.
5V/SB5V 5V supply for external devices. SB5V is supplied during powerdown to allow wakeup on
USB device activity. Protected by resettable 1.1A fuse covering both USB ports.
Kommentare zu diesen Handbüchern