Kontron NSW1U IP Network Server Bedienungsanleitung PDF herunterladen (Seite 38)

NSW1U Network Server—Server Installations and Upgrades

Kontron IP Network Server NSW1U

Product Guide, rev. 1.4 December 2009

9. Lift the processor from the socket.

3.3.4.3 Installing the New Processor

Note: Follow the ESD precautions covered in Section 3.3.4.1, “ESD and Processor Handling

Precautions” on page 36.

To install a processor, follow these instructions:

1. Take the processor out of its packaging and remove the protective shipping cover. (“A”)

Caution: The underside of the processor has components that may damage the socket pins if

installed improperly. The processor must align correctly with the socket opening before

installation. Do not drop the processor into the socket!

2. Orient the processor with the socket so that the processor cutouts match the socket notches.

(Figure 22, “A”.)

3. Gently place the processor in the socket. (“B”)

Figure 20. Opening the Load Plate

Figure 21. Removing the Processor Protective Cover

AF000769

AF000770

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 109 110

Keine Kommentare

Kontron NSW1U IP Network Server Bedienungsanleitung Seite 38