Kontron NSW1U IP Network Server Bedienungsanleitung PDF herunterladen (Seite 52)

NSW1U Network Server—Optional Component Installation Procedures

Kontron IP Network Server NSW1U

Product Guide, rev. 1.4 December 2009

4.4.1 Removing the PCI Riser Card Assembly

To remove an installed riser card assembly, follow these steps:

1. Loosen the blue captive screw that secures the riser card assembly to the server board. (“A” in

Figure 32)

2. Loosen the blue captive thumb screw on the rear panel of the chassis. (“B”)

Caution: Touching the battery with a metallic object, such as any part of the PCI riser assembly,

can momentarily short the battery.

3. Lift the riser card assembly straight up and remove it from the chassis. (“C”)

Figure 32. Removing the Riser Card Assembly

TS000411

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 109 110

Keine Kommentare

Kontron NSW1U IP Network Server Bedienungsanleitung Seite 52