Kontron AT890X Full-Size CLI Bedienungsanleitung PDF herunterladen (Seite 124)

Routing Commands AT8901/2/3

AT8901/2/3 CLI Reference Manual Page 3 - 12

Encapsulation Type Is the encapsulation type for the specified interface. The types

are: Ethernet or SNAP.

IP MTU Displays the maximum transmission unit (MTU) size of a frame, in

bytes.

3.2.13 show ip interface brief

This command displays summary information about IP configuration settings for all

ports in the router.

Format

show ip interface brief

Modes Privileged EXEC

User EXEC

Interface Valid slot and port number separated by forward slashes.

IP Address The IP address of the routing interface in 32-bit dotted decimal format.

IP Mask The IP mask of the routing interface in 32-bit dotted decimal format.

Netdir Bcast Indicates if IP forwards net-directed broadcasts on this interface. Pos-

sible values are Enable or Disable.

MultiCast Fwd Indicates the multicast forwarding administrative mode on the inter-

face. Possible values are Enable or Disable.

3.2.14 show ip route

This command displays the routing table. The <ip-address> specifies the network for

which the route is to be displayed and displays the best matching best-route for the

address. The

<mask> specifies the subnet mask for the given <ip-address>. When you

use the

longer-prefixes keyword, the <ip-address> and <mask> pair becomes the

prefix, and the command displays the routes to the addresses that match that prefix.

Use the

<protocol> parameter to specify the protocol that installed the routes. The

value for

<protocol> can be connected, ospf, rip, static, or /jointfilesconvert/1651563/bgp. Use the all

parameter to display all routes including best and non-best routes. If you do not use the

all parameter, the command only displays the best route.

NOTE: If you use the

connected keyword for <protocol>, the all option is

not available because there are no best or non-best connected routes.

Format

show ip route [{<ip-address> [<protocol>] | {<ip-address>

<mask> [longer-prefixes] [<protocol>] | <protocol>} [all]

| all}]

Mode Privileged EXEC

User EXEC

Route Codes Displays the key for the routing protocol codes that might appear in

the routing table output.

The

show ip route command displays the routing tables in the following format:

Code IP-Address/Mask [Preference/Metric] via Next-Hop, Interface

The columns for the routing table display the following information:

Code The codes for the routing protocols that created the routes.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 303 304

Kommentare zu diesen Handbüchern

Keine Kommentare

Kontron AT890X Full-Size CLI Bedienungsanleitung Seite 124

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Kontron AT890X Full-Size CLI