Kontron AT8404 CLI Bedienungsanleitung PDF herunterladen (Seite 119)

AT8404 Switching Commands

Page 2 - 83 AT8404 CLI Reference Manual

2.16.9 ip dhcp snooping log-invalid

Use this command to control the logging DHCP messages filtration by the DHCP Snooping application.

2.16.9.1 no ip dhcp snooping log-invalid

Use this command to disable the logging DHCP messages filtration by the DHCP Snooping application.

2.16.10 ip dhcp snooping trust

Use this command to configure the port as trusted.

2.16.10.1 no ip dhcp snooping trust

Use this command to configure the port as untrusted.

2.16.11 ip verify source

Use this command to configure the IPSG source ID attribute to filter the data traffic in the hardware. Source ID is

the combination of IP address and MAC address. Normal command allows data traffic filtration based on the IP

address. With the “port-security” option, the data traffic will be filtered based on the IP and MAC addresses.

2.16.11.1 no ip verify source

Use this command to disable the IPSG configuration in the hardware. You cannot disable port-security alone if it is

configured.

Default disabled

Format ip dhcp snooping log-invalid

Mode Interface Config

Format no ip dhcp snooping log-invalid

Mode Interface Config

Default disabled

Format ip dhcp snooping trust

Mode Interface Config

Format no ip dhcp snooping trust

Mode Interface Config

Default the source ID is the IP address

Format ip verify source {port-security}

Mode Interface Config

Format no ip verify source

Mode Interface Config

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 372 373

Keine Kommentare

Kontron AT8404 CLI Bedienungsanleitung Seite 119