
AT8404 Switching Commands
Page 2 - 119 AT8404 CLI Reference Manual
Example: The following shows example CLI display output for the command.
(FASTPATH Switching) #show lldp remote-device detail 0/7
LLDP Remote Device Detail
Local Interface: 0/7
Remote Identifier: 2
Chassis ID Subtype: MAC Address
Chassis ID: 00:FC:E3:90:01:0F
Port ID Subtype: MAC Address
Port ID: 00:FC:E3:90:01:11
System Name:
System Description:
Port Description:
System Capabilities Supported:
System Capabilities Enabled:
Time to Live: 24 seconds
2.23.15 show lldp local-device
Use this command to display summary information about the advertised LLDP local data. This command can display
summary information or detail for each interface.
Chassis ID
Subtype
The type of identification used in the Chassis ID field.
Chassis ID The chassis of the remote device.
Port ID Subtype The type of port on the remote device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.
System
Description
Describes the remote system by identifying the system name and versions of hardware,
operating system, and networking software supported in the device.
Port Description Describes the port in an alpha-numeric format. The port description is configurable.
System
Capabilities
Supported
Indicates the primary function(s) of the device.
System
Capabilities
Enabled
Shows which of the supported system capabilities are enabled.
Management
Address
For each interface on the remote device with an LLDP agent, lists the type of address the
remote LLDP agent uses and specifies the address used to obtain information related to the
device.
Time To Live The amount of time (in seconds) the remote device's information received in the LLDPDU
should be treated as valid information.
Format show lldp local-device {<slot/port> | all}
Mode Privileged EXEC
Term Definition
Interface The interface in a slot/port format.
Term Definition
Kommentare zu diesen Handbüchern