Kontron AT8404 CLI Bedienungsanleitung PDF herunterladen (Seite 96)

Switching Commands AT8404

AT8404 CLI Reference Manual Page 2 - 60

2.12.20 show storm-control

This command displays switch configuration information. If you do not use any of the optional parameters, this

command displays global storm control configuration parameters:

• Broadcast Storm Recovery Mode may be enabled or disabled. The factory default is disabled.

• 802.3x Flow Control Mode may be enabled or disabled. The factory default is disabled.

Use the all keyword to display the per-port configuration parameters for all interfaces, or specify the slot/port

to display information about a specific interface.

Example: The following shows example CLI display output for the command.

(Broadcom FASTPATH Routing) #show storm-control

802.3x Flow Control Mode....................... Disable

Example: The following shows example CLI display output for the command.

(Broadcom FASTPATH Routing) #show storm-control 1/0/1

Bcast Bcast Mcast Mcast Ucast Ucast

Intf Mode Level Mode Level Mode Level

------ ------- -------- ------- -------- ------- --------

1/0/1 Disable 5% Disable 5% Disable 5%

Example: The following shows an example of part of the CLI display output for the command.

(Broadcom FASTPATH Routing) #show storm-control all

Bcast Bcast Mcast Mcast Ucast Ucast

Intf Mode Level Mode Level Mode Level

------ ------- -------- ------- -------- ------- --------

1/0/1 Disable 5% Disable 5% Disable 5%

1/0/2 Disable 5% Disable 5% Disable 5%

1/0/3 Disable 5% Disable 5% Disable 5%

1/0/4 Disable 5% Disable 5% Disable 5%

1/0/5 Disable 5% Disable 5% Disable 5%

Format show storm-control [all | <slot/port>]

Mode Privileged EXEC

Term Definition

Bcast Mode Shows whether the broadcast storm control mode is enabled or disabled. The factory default

is disabled.

Bcast Level The broadcast storm control level.

Mcast Mode Shows whether the multicast storm control mode is enabled or disabled.

Mcast Level The multicast storm control level.

Ucast Mode Shows whether the Unknown Unicast or DLF (Destination Lookup Failure) storm control mode

is enabled or disabled.

Ucast Level The Unknown Unicast or DLF (Destination Lookup Failure) storm control level.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 372 373

Keine Kommentare

Kontron AT8404 CLI Bedienungsanleitung Seite 96