Kontron AT8404 CLI Bedienungsanleitung PDF herunterladen (Seite 80)

Switching Commands AT8404

AT8404 CLI Reference Manual Page 2 - 44

2.11.8.1 no dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will transmit an

EAPOL EAP Request/Identity frame before timing out the supplicant.

2.11.9 dot1x max-users

Use this command to set the maximum number of clients supported on the port when MAC-based dot1x

authentication is enabled on the port. The maximum users supported per port is dependent on the product. The

<count> value is in the range 1 - 16.

2.11.9.1 no dot1x max-users

This command resets the maximum number of clients allowed per port to its default value.

2.11.10 dot1x port-control

This command sets the authentication mode to use on the specified port. Select force-unauthorized to specify

that the authenticator PAE unconditionally sets the controlled port to unauthorized. Select force-authorized to

specify that the authenticator PAE unconditionally sets the controlled port to authorized. Select auto to specify that

the authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between

the supplicant, authenticator and the authentication server.

2.11.10.1 no dot1x port-control

This command sets the 802.1x port control mode on the specified port to the default value.

2.11.11 dot1x port-control all

This command sets the authentication mode to use on all ports. Select force-unauthorized to specify that the

authenticator PAE unconditionally sets the controlled port to unauthorized. Select force-authorized to specify

that the authenticator PAE unconditionally sets the controlled port to authorized. Select auto to specify that the

Format no dot1x max-req

Mode Interface Config

Default 16

Format dot1x max-users

<count>

Mode Interface Config

Format no dot1x max-req

Mode Interface Config

Default auto

Format dot1x port-control {force-unauthorized | force-authorized | auto}

Mode Interface Config

Format no dot1x port-control

Mode Interface Config

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 372 373

Keine Kommentare

Kontron AT8404 CLI Bedienungsanleitung Seite 80