Kontron AT8404 CLI Bedienungsanleitung PDF herunterladen (Seite 70)

Switching Commands AT8404

AT8404 CLI Reference Manual Page 2 - 34

When the interface parameter is not specified, only the global mode of the Voice VLAN is displayed.

When the interface is specified:

2.6 Provisioning (IEEE 802.1p) Commands

This section describes the commands you use to configure provisioning, which allows you to prioritize ports.

2.6.1 vlan port priority all

This command configures the port priority assigned for untagged packets for all ports presently plugged into the

device. The range for the priority is 0-7. Any subsequent per port configuration will override this configuration setting.

2.6.2 vlan priority

This command configures the default 802.1p port priority assigned for untagged packets for a specific interface. The

range for the priority is 0–7.

2.7 Protected Ports Commands

This section describes commands you use to configure and view protected ports on a switch. Protected ports do not

forward traffic to each other, even if they are on the same VLAN. However, protected ports can forward traffic to all

unprotected ports in their group. Unprotected ports can forward traffic to both protected and unprotected ports. Ports

are unprotected by default.

Mode Privileged EXEC

Term Definition

Administrative

Mode

The Global Voice VLAN mode.

Term Definition

Voice VLAN Mode The admin mode of the Voice VLAN on the interface.

Voice VLAN ID The Voice VLAN ID

Voice VLAN

Priority

The do1p priority for the Voice VLAN on the port.

Voice VLAN

Untagged

The tagging option for the Voice VLAN traffic.

Voice VLAN CoS

Override

The Override option for the voice traffic arriving on the port.

Voice VLAN Status The operational status of Voice VLAN on the port.

Format vlan port priority all <priority>

Mode Global Config

Default 0

Format vlan priority <priority>

Mode Interface Config

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 372 373

Keine Kommentare

Kontron AT8404 CLI Bedienungsanleitung Seite 70