Kontron AT8404 CLI Bedienungsanleitung PDF herunterladen (Seite 132)

Switching Commands AT8404

AT8404 CLI Reference Manual Page 2 - 96

2.18.5 set igmp maxresponse

This command sets the IGMP Maximum Response time for the system, or on a particular interface or VLAN. The

Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an

interface because it did not receive a report for a particular group in that interface. This value must be less than the

IGMP Query Interval time value. The range is 1 to 25 seconds.

2.18.5.1 no set igmp maxresponse

This command sets the max response time (on the interface or VLAN) to the default value.

2.18.6 set igmp mcrtrexpiretime

This command sets the Multicast Router Present Expiration time. The time is set for the system, on a particular

interface or VLAN. This is the amount of time in seconds that a switch waits for a query to be received on an interface

before the interface is removed from the list of interfaces with multicast routers attached. The range is 0 to 3600

seconds. A value of 0 indicates an infinite time-out, i.e. no expiration.

Mode • Interface Config

• Global Config

Format no set igmp groupmembership-interval <vlan_id>

Mode VLAN Config

Default 10 seconds

Format set igmp maxresponse <1-25>

Mode • Global Config

• Interface Config

Format set igmp maxresponse <vlan_id> <1-25>

Mode VLAN Config

Format no set igmp maxresponse

Mode • Global Config

• Interface Config

Format no set igmp maxresponse <vlan_id>

Mode VLAN Config

Default 0

Format set igmp mcrtrexpiretime <0-3600>

Mode • Global Config

• Interface Config

Format set igmp mcrtrexpiretime <vlan_id> <0-3600>

Mode VLAN Config

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 372 373

Keine Kommentare

Kontron AT8404 CLI Bedienungsanleitung Seite 132