Kontron AT8404 CLI Bedienungsanleitung PDF herunterladen (Seite 326)

Management Commands AT8404

AT8404 CLI Reference Manual Page 5 - 50

<bplclk> = {clk1a|clk1b|clk2a|clk2b|clk3a|clk3b}

5.16.8 set board clock override

The command overrides the clock ekeying for an AMC clock. A correct MUX setting (set board clock mux-amc) must

be done before. If the source for an AMC clock is set to PLL, the clock frequence must be specified too, otherwise

the related parameter is not used.

<amc> = {amcb1|amcb2|amcb3|amcb4}

5.16.9 set board clock receiver

The command configures the clock description for clocks from the AMC. You can specify for family and accuracy

either default values (sonet/stratum3 or sonet/stratum3E) or any protocol value (0..255). You can specify for

frequency a well-known value or any other value (unit is Hz).

<amc> = {amcb1|amcb2|amcb3|amcb4}

5.16.10 set board clock source

The command configures the clock description for clocks to the AMC. You can specify for family and accuracy either

default values (sonet/stratum3 or sonet/stratum3E) or any protocol value (0..255). You can specify for frequency a

well-known value or any other value (unit is Hz).

<amc> = {amcb1|amcb2|amcb3|amcb4}

5.16.11 show boardinfo clock bpl

This command shows the configuration of backplane clocks. The backplane clocks are displayed with the state

(enabled/disabled) and (if enabled) the mapped AMC source with clock configuration attributes.

Mode Priviledged EXEC

Format set board clock override

<amc> {tclka|tclkc} {enable|disable}

[2kHz|8kHz|19_44MHz]

Mode Priviledged EXEC

Format set board clock receiver

<amc> {tclkb|tclkd} enable sonet

{stratum3|stratum3E} {8kHz|1_544MHz|2_048_MHz|19_44MHz}

set board clock receiver <amc> {tclkb|tclkd} enable <family> <accuracy>

set board clock receiver

<amc> {tclkb|tclkd} disable

Mode Priviledged EXEC

Format set board clock source <amc> {tclka|tclkc} enable sonet

{stratum3|stratum3E} {8kHz|1_544MHz|2_048_MHz|19_44MHz}

set board clock source <amc> {tclka|tclkc} enable <family> <accuracy>

{8kHz|1_544MHz|2_048_MHz|19_44MHz}

set board clock source <amc> {tclka|tclkc} disable

Mode Priviledged EXEC

Format show boardinfo clock bpl

Mode Priviledged EXEC

1 2 ... 321 322 323 324 325 326 327 328 329 330 331 ... 372 373

Keine Kommentare

Kontron AT8404 CLI Bedienungsanleitung Seite 326